Waterchef SF-7C Manuel d'utilisateur télécharger pdf (Page 7)

Cleaning is required when mineral deposits appear on spray nozzles to maintain

proper operating conditions. Clean by rubbing hand over nozzles to remove build-up.

Do NOT clean or rinse any part with harsh chemicals, heavy duty cleaners, or

abrasives; this may damage the parts or nish and may void warranty.

www.waterchef.com

CONDITION

Leaking occurs between existing

shower arm and Housing Collar.

REASON

Occasionally, a shower arm can vary

signicantly from the standard size

and shape, preventing the shower

arm from seating properly onto the

Housing Collar Gasket (e.g. a shower

arm that ares outward or begins to

curve close to the threading).

SOLUTION

Contact WaterChef Customer Care

at 1.800.879.8909 (intl.+1.775.359.9500)

for assistance.

CONDITION

Leaking occurs between Filter

Housing and Filter Base.

REASON #1

Missing O-ring. (There should be

TWO O-rings on the Filter Base and

ONE O-ring on the Filter Cartridge.)

REASON #2

O-ring may have a nick or cut in it.

SOLUTION

Replace O-ring(s).

CONDITION

Water is owing slowly from the

Shower Wand.

REASON

Mineral build up on rubber nozzles.

SOLUTION

You may rub your hand over rubber

nozzles to remove mineral build-up.

Alternatively, remove Shower Wand

and soak in household vinegar.

CONDITION

Filter Base cannot be removed

from Filter Housing.

REASON

Excessive water pressure may have

caused threads to bind.

SOLUTION

Be certain that your hands, Filter

Base and Filter Housing are dry.

Grip Filter Base with one hand while

securing Filter Housing with the other

hand. Turn counter-clockwise to

detach. Hint: Rubber gloves or a

rubber jar opening matt may also be

used if you still experience diculty.

Do NOT use any abrasive materials,

as this may damage the housing.

CARE AND CLEANING

TROUBLESHOOTING

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Waterchef SF-7C Manuel d'utilisateur Page 7

Commentaires sur ces manuels